What is the difference between PVC sheet floor and PVC coil floor? Enjiadi, the manufacturer of sheet extrusion equipment, introduces to you:

PVC floor mainly has the following types:

1. Sheet extrusion production equipment, coil PVC floor, conventional materials and accessories are as follows:

(1) PVC floor;

(2) Welding wire;

(3) Special glue;

(4) Glass glue (used to close the gap at the corner of the wall). If the anchor line is installed, the glass glue is not used to close the mouth.) ；

(5) Edge pressing strip (at the entrance or at the junction of other floors and PVC floors, the edge pressing strip shall be used to close up, so as not to damage the floor by kicking);

2. For sheet extrusion production equipment, the sheet is coated with PVC floor, and the conventional auxiliary materials are as follows:

(1) PVC floor;

(2) Special glue;

(3) Glass glue (used to close the gap at the corner of the wall). If the anchor line is installed, the glass glue is not used to close the mouth.) ；

(4) Edge pressing strip (at the entrance or at the junction of other floors and PVC floors, the edge pressing strip shall be used to close up, so as not to damage the floor by kicking);

3. For PVC lock lock floor of sheet extrusion production equipment, the conventional auxiliary materials are as follows:

(1) PVC lock floor;

(2) Moisture proof cotton (also can not use; PVC floor is generally has moisture-proof effect, and then put moisture-proof cotton is also because you want better effect. For example: the feet feel different, and the ground is not completely cleaned up, some fine sand, put the moisture-proof cotton people walk on the floor, to avoid the sound of friction between the floor and fine sand;

(3) Glass glue (used to close the gap at the corner of the wall). If the anchor line is installed, the glass glue is not used to close the mouth.) ；

(4) Edge pressing strip (at the entrance or at the junction of other floors and PVC floors, the edge pressing strip shall be used to close up, so as not to damage the floor by kicking);

4. If the ground is not, and PVC floor needs to be paved, the ground must be self leveling before construction. Self leveling materials and accessories include:

(1) Self leveling material;

(2) Interface agent.

The above contents are based on the materials and auxiliary materials required for PVC floor paving in the normal site. If there are special requirements or the site pattern is different, the specific materials and auxiliary materials need to be determined by the construction master according to the site. The above content can be used for reference!!